Laser marking machine in use before and after should be noted that care and maintenance. As a limited offer on-site environment, the need for simple daily routine maintenance, monthly maintenance and monthly, each year's annual maintenance. Maintenance mainly refers to the power detection, electrical parts of the alarm detection and treatment, water testing, and regular testing of mechanical moving parts, the laser power detection.
Warning:
The maintenance of both the machine off, off the case of total power to operate; for maintenance of power supply, circuit boards and other electronic devices, power shutdown after, need to wait for 5 minutes, before proceeding, otherwise, can cause electric shock accident .
1. Routine maintenance and maintenance:
In the before and after work, should pay attention to table panel, scan lens maintenance and cleaning required for the scan lens cleaning, use a clean dust cloth, stained with high-purity industrial / best medicinal alcohol, gently to swabbing the surface of the lens, do not force too much, if any hard object, it is easy to scratch the surface of the degree of membrane damage caused by the lens and the laser power decreased.
Body up and down the dust, computer monitors, keyboards, etc., apply a clean rag moistened with alcohol swabbing clean.
Before starting the inspection, pipe fittings for leaks, the water tank is adequate.
Boot, cabinet fans, control box fan is running. Among the steps in the boot, check for abnormalities, such as light when the light is not bright. Such as abnormal, the maintenance engineer should be promptly recorded and reported preliminary detection and exclusion; serious cases, should be promptly and contact the manufacturer and request their inspection and maintenance.
2. Monthly maintenance and maintenance:
Mainly maintenance and cleaning inside the cabinet should have a special monthly maintenance engineers to deal with.
Replace water tank in the cleaner work environment, the water tank if you do not dirty, you can point back to a long interval of time, but up to no more than three months, if in a relatively dirty environment, at least every months to replace a water, dirty water, if found, should be replaced.
Check whether the water-cooled machine Nianman dust filters, dust should be cleaned more, otherwise it will affect the cooling effect of water-cooled machine, and will increase power consumption.
Boot, cabinet fans, control box fan is running.
Check all power and control box of the control board is working correctly, several key power supply voltage is correct.
Boot step, check whether there is an exception, such as the bright lights when not lit. Such as abnormal, the maintenance engineer should be promptly recorded and reported preliminary detection and exclusion; serious cases, contact with manufacturers should be timely
