Many of my friends have been asking about the battery issue, I have always said the actual laptop battery is just a necessary spare parts, we can try to protect, there is no need to deliberate care, or else to the machine not work that day still sported a fast strong Why the battery use, no more than second-hand laptop as you can only transfer chip.
For use, how to use the per cent of the number of recharge should be said that there is no excessive stress, because if the user will become very passive, the actual battery is not so precious.
On the use of AC when the battery is on the machine or to have also won as you have had. Notebook computer circuit control much better than a cell phone, fully charged it will automatically cut off after the charging circuit and carry out small current loop in order to maintain the battery charge state, the circuit control design better machines are less than 95% of the electricity began to charge, and So you need not worry, such as the battery charging plug to be indefinite ghost argument; if win to save it, it is recommended you put on the battery out of a layer of plastic wrap, so that dust can be isolated and placed in a cool place, and then take a regular basis come out with what, Chong Chongdian in order to avoid the loss of activity of the battery.
There is also a question we ask will be more, that is, whether there is a need to calibrate the battery, how to calibrate the battery? The answer is yes, because the battery use and charging the instability will cause the battery capacity decline, this decline is not due to aging caused by, so the right can be calibrated to make this part of the loss of the capacity of recovery . Therefore, the battery calibration on a regular basis is very necessary thing, such as the January-February time.
Such as Compaq and IBM laptop's own power management in BIOS or a program provides a battery calibration feature, so use two brands of friends can according to the prompts. For those who do not provide this feature the brand's users can follow my following steps:
1. The screen saver is set to "None"
2. In the Windows Power Management power scheme will be set to "always open", and will be following the closure of all equipment related to the menu is set to "never"
3. In the alert tab will be "insufficient power warning" is set to 10%, the operation is set to "refrain from any action"; will be "a serious power shortage alert," set to 3%, operating as a "standby"
4. The screen brightness to the maximum
5. Confirmed that closed all the windows, and save all the data from previous work
6. Confirmed that over 80% battery charge after the unplug the power and all external devices, this time, if the screen automatically reduces brightness, then place it hit the brightest
OK, you can go to sleep, the discharge after the notebook will automatically shut down after the power plug to recharge laptop, pay attention to, etc. must be fully charged and then boot, then the power before the program back to the calibration settings.
The aim is to continuous low current discharge batteries, which discharge status in our daily use is unlikely to be achieved, as the normal state of inevitable that we will carry out all kinds of make up and down changes in current operations.
IBM, SONY such a machine can detect the battery capacity before and after the change, other machines can download a program called batterymon to see, you will find a capacity of 1.1 points restored, but to remind here that if your battery has been because excessive use of the aging, and that this ad-hoc methods are used that were not there.
This method is also suggested, where the hand of a friend just the use of new aircraft, generally put into use before the Li battery in accordance with this method is best for 2-3 times, so as to make the maximum possible performance of the battery into an optimal position.
